Veneer is also known as wood veneer. After nearly 70 years of development, wood veneer and its veneer decoration technology are gradually improved. With the continuous development of China's economy, people's income has been greatly improved. Accordingly, people have quite high requirements for the service and quality provided by decoration and building materials industries. This situation promotes the development of China's furniture manufacturing industry and decoration industry, and also puts forward higher standards for the production of veneer (veneer). Veneer production can not be separated from the rotary cutting machine, but few people can fully understand the role of the rotary cutting machine in the process of veneer production, and can no longer choose the rotary cutting machine is to make the right choice. In order to help you choose a high-quality veneer cutter, let's first understand the steps of making veneer with the veneer cutter.
There are two main steps in the production of veneer, as follows:
In the first step, the rotary cutter cuts logs to form veneers. According to the data requirements of hardwood plywood and veneer Association, the commonly used standard cutting method of veneer in the market is as follows: rotary cut – install the log in the center of the lathe, insert the slicer into the log at a small angle, and then rotate the log against the slicer to create the peeled veneer. The veneer can be wide enough to provide the whole board (single board). Quarter Slicing – a radial cut is a ring that is cut vertically to the log to produce a veneer with a straight grain. Cut cut – the cut veneer is made from a variety of oak. The pith rays of oak extend from the center of the log, like the curved spokes of a wheel. The pith ray that cuts to oak at a small angle can reduce the appearance of "scale" wood grain as much as possible and produce straight grain wood skin. Lengthwise slicing – place the flat saw board horizontally through the fixed slicing knife, and cut out the veneer from the bottom of the board. The texture pattern of the lengthways cut wood veneer varies. Plain slicing (flat cut) - also known as slicing, slicing / slicing. Slicing refers to slicing the wood along the parallel line of the log center by the slicer. From the string cut wood veneer cut out of the folio wood, the ring at the first floor will form the pattern of "cathedral".
In the second step, the folding machine will automatically fold and close the cut veneer, which is faster, better and more neat than manual closing.
At present, the technology of the commonly used rotary cutting machine in our country is relatively backward, not only the automation degree and production efficiency are low, but also the thickness of the processed plate rarely meets the standard requirements, let alone the utilization rate of raw materials is very low, which causes serious waste, improves the cost of the enterprise, and reduces the profitability of the enterprise. In order to solve the above problems, improve the production status of veneer and improve the production quality of veneer, I suggest you choose Guoyu rotary cutting machine.
