Card free veneer peeling machine is one of the equipment that we often use in the wood manufacturing industry, but if the product is used for a period of time, there will be some problems. Now let's carefully understand the knowledge introduction in this respect?
We know that some parts of the equipment are easy to wear, such as the blades of the non card veneer peeling machine. Because the veneer peeling machine is rotating at a high height, the blade wear will be relatively large. After the blade of the product is used for a period of time, the blade edge wear will seriously affect the quality of the sheet, so the blade needs to be disassembled and grinded with a plane grinder. All sliding and rotating parts of the product should be lubricated at all times, and the grease fitting should be filled with grease regularly. At the same time, after a period of time, it is necessary to check whether there is a gap between the product accessories. When adjusting, loosen the dovetail fixing bolt slightly, turn the dovetail adjusting bolt inward to the appropriate clearance, and then tighten the dovetail fixing bolt.
In order to ensure the quality of the products, we need to pay attention to the regular manufacturers to buy, which can save costs. At the same time, we need to pay attention to the need to replace the products immediately if they are damaged to ensure the quality of the products.
