In the process of operation, the machine equipment of the rotary cutter manufacturer will inevitably encounter some problems, such as stuck situation. How to solve this problem?
If the rotary cutting machine is stuck, first shut down the machine and cut off the power. Then check what causes the stuck. Generally, it is necessary to check whether the saw blade is not tightened, or whether the saw blade has been used for too long and is not sharp, the belt is slipping or damaged. Adjust and replace it according to the situation, or the hardness of the processed wood is too high, the machine has too much stress, the power of the machine is small, causing the stuck, and the installation angle of the blade head If the problem is not sharp enough, it shall be handled according to the situation. After troubleshooting one by one, the cause of the problem will be found. Do not dismantle it blindly to avoid secondary damage. Only when the remedy is right can the fundamental problem be solved.
Before starting the rotary cutting machine, make sure that the components are installed correctly, be familiar with the operation of the machine, and take away the items that have nothing to do with the equipment. When turning to the end, use the small wooden shaft or other objects to knock off the remaining wooden shaft. Do not take the wooden shaft by hand to avoid danger.
