The ordinary cam curve plate has a card rotary cutter, which can be divided into the following specifications: ordinary core plate non card shaft rotary cutter, which generally has a rotating cutting length of 500mm-2000mm, and a rotating cutting diameter of 30mm-300mm, By using different curvature radius of the cam curve plate to achieve the choice of turning diameter, the commonly used large curvature radius is 220mm, 260mm and 300mm.
The thickness of veneer is generally adjusted within 1.2mm-3.6mm by changing gears. It is a kind of equipment which is suitable for rotating the remaining wood shaft which is cut out by a card rotary cutter or small log which is less than 300 mm into a single board. This kind of machine has a general length of 2000 mm-3200 mm.
Generally, the rotary cutting diameter is 200 mm-450 mm. The selection of the rotary cutting diameter is realized by using the cam curve plates with different curvature radii. The commonly used large curvature radii are 300 mm, 350 mm, 400 mm and 450 mm. The thickness of the single plate is generally 0.3 mm-4.0 mm, which can be adjusted arbitrarily by changing the gear.
It is a kind of equipment that can be used to spin the remaining wood shaft out of the large-scale rotary cutting machine or the small log below 450mm through the rotary cutting machine and then use the non card machine to cut the veneer. This kind of spining machine is generally 1000mm-1400mm in length.
The rotary cutting diameter is generally 12 MM-200 mm, and the selection of the rotary cutting diameter is realized by using the cam curve plates with different curvature radii. The commonly used large curvature radii are 120 mm, 150 mm and 180 mm, 200 mm; the thickness of the single plate is generally 0.5 mm-1.2 mm, which can be adjusted arbitrarily by changing gears. It is a kind of equipment which is suitable for turning the remaining wood shaft out of the non card rotary cutting machine or turning the small log below 200 mm into veneer.
