Rotary peeling machine is the main tool for processing wood, and with the birth of NC rotary peeling machine, it has saved the manpower to the greatest extent and reduced the cost of production. Although it is numerically controlled, there are still some matters needing attention in the process of use for safety and smooth production, so today we will briefly understand what restrictions should be paid attention to when using CNC rotary peeling machine.
1. The rotary peeling machine can only be used for the designed purpose, do not use it for other purposes, such as rotary cutting rubber, plastic, etc., because its design function does not have these uses.
2. When setting the minimum machining remaining amount, the minimum set value cannot be less than 30mm, otherwise it will easily cause collision failure during work.
3. When setting the parking point, the upper limit of the set value cannot exceed the maximum stroke of the equipment, and the lower limit cannot be less than the set value of the remaining machining amount, otherwise the machine cannot work.
4. The rotary cutter should be used within the scope of use specified by the technical characteristics.
It is a constraint, but also a guarantee of safe and smooth production! So the necessary code of conduct when using a rotary cutter should still be followed
