Computer control box: complete the whole control function of the equipment. Operator station: transmit signals to the control box to operate the machine. Automatic wooden shaft ramming device: after the completion of automatic rotary cutting line, the remaining wooden shaft shall be rammed from the knife seam. Automatic tool sewing arm support: adjust the arm support of tool sewing. Automatic tool sewing track: auxiliary automatic track adjustment to improve accuracy.
Cutter cutter motor: it is used to drive the reducer and drive the cutter cutter cutter to rotate. Cutter cutter reducer: the power reduction part of the transmission cutter cutter cutter motor. Transmission belt motor: used to drive the reducer and drive the transmission belt to rotate. Transmission belt reducer: transmission belt motor power reduction part. Double roll reducer: drive the power reduction part of double roll motor.
Double roll motor: used to drive the reducer and drive the double roll to rotate. Feed screw: drive the feed force to make the whole tool rest translate. It is the power support when the automatic rotary cutting line completes the wood rotary cutting. Double roller: it is used to drive the mechanical power of wood rotary cutting, which is used to pull up the rotation of wood. Single roll motor: used to drive the reducer and drive the single roll to rotate.
Single roll reducer: drive the power reduction part of single roll motor. Feed reducer: power reduction part of drive feed motor. Feed motor: used to drive the reducer and drive the rotation of feed lead screw. Automatic adjustment knife seam support: used to fix the single roller drive assembly and complete the adjustment knife seam function. Automatic tool sewing track: it is used to adjust the slope of the front and back stroke, so as to complete the change of the diameter of the wood from large to small during the rotary cutting to the automatic tool sewing.
The working principle of the machine is different from that of the common machine. During rotary cutting, the digested wood section is stuck between the two feeding rollers and the indenter by the feeder. The wood section is driven by the rotating roller to do the main rotary motion, and the linear motion of the roller pushes the wood section to do the feeding motion relative to the cutter.
