The products made by the rotary cutter manufacturer are used in many industries. Because the material of the products is metal, we need to pay attention to several aspects when we operate. Now, let's have a careful understanding of them?
The length of the rotary cutter is generally 50 mm larger than the distance between the two chuck heads. The height of the center line of the clamping shaft from the machine bed surface determines the diameter of the rotary cutting wood section. The diameter of the rotary cutting section also depends on the distance between the center line of the trunnion and the cutter bed. The working feed speed is the distance that the cutter bed moves in each revolution or minute of the chuck. The feed speed determines the thickness of the rotary veneer. In order to obtain different thickness of veneer, the rotary cutter is equipped with a feed box with feed speed conversion mechanism. The distance between the two chuck heads of the rotary cutter determines the length of the wood section, and therefore the width of the veneer strip. It has a large distance and a small distance. The length of wood section shall not be greater than its large distance and not less than its small distance.
The speed of the clamping shaft is related to the transmission mode of the rotary cutting machine transmission device, and is determined according to the requirements of the rotary cutting conditions. At present, there are two types of rotary cutting machines according to the speed of shaft sticking in the process of rotary cutting. One is that the speed of shaft is fixed and the other is that the speed of shaft clamping increases with the decrease of wood section rotation.
