Woodworking rotary cutting machine is generally divided into card free and card free woodworking rotary cutting machine, they also have vertical and horizontal two kinds. The vertical and horizontal rotary cutting methods are the same.
The card free rotary cutting machine has no clamping head, and its way to make wood rotate is to rotate the wood by three extrusion rolls at the same time, so as to meet the working requirements. If there is no card, only small diameter wood can be selected, but the wood must be round. Generally, it can be rotated within 30 cm, and the small core can be rotated to about 3 cm.
With card woodworking rotary cutting machine is to put a certain length of wood flat on the machine, left and right sides have card head respectively, can rotate, both sides of the card head squeeze wood, start to rotate rotary cutting, achieve the purpose of rotary cutting! If you have a card, you can cut the wood with a large diameter of 1.3 meters, but the smallest wood core should be more than 10 cm.
